Gracias a nuestro completo surtido de intercambiadores frío calor de agua y fluidos con el que contamos, estamos capacitados para utilizar agua, soluciones de glicol, aguas subterráneas, vapor y cualquier clase de refrigerante.
Nosotros mismos fabricamos las bobinas estándar para el calentamiento y la refrigeración del agua según las especificaciones exactas de cada cliente. Hay diseños de intercambiadores de calor disponibles idénticos a los de las marcas más comunes, por lo que son una solución perfecta a la hora de realizar reemplazos. Disponemos de una completa gama de tamaños de tubo de 5 mm DE, 7 mm DE, 5/16″ (7,9 mm) DE, 3/8″ (9,5 mm) DE, 1/2″ (12,7 mm) y 5/8″ (15,9 mm) DE. Y con la opción de tubos lisos o tubos estriados (interior ranurado). Existe una amplia gama de separaciones y modelos aletados: perfiles lisos, cortados, de punta elevada, ondulados, en lamas, corrugados, de aleta cortada en onda.

Booster coils built with either flanged or slip-and-drive casings are available. These coils are commonly duct-mounted or used within VAV units for low-capacity reheat applications. Booster coils are constructed without headers, in either one or two circuit configurations.

Steam coils are ruggedly constructed for steam pressures up to 1034 kPa. Standard configurations, as well as special arrangements are available. Steam coils typically feature steam supply header and condensate return headers and connections on opposite sides of the coil. Steam supply connections are typically placed centrally on the supply header, with the condensate return connections typically placed at the bottom of the return header providing self-draining.

Fluid coolers for oil, after cooling, and special purpose cooling can be designed to your exact project requirements. Blast coolers, are a fast and efficient way of rejecting heat from process fluids before further cooling. Heat recovery (run-around) coils are an effective way to reclaim waste or process heat that would otherwise be lost, providing valuable operating cost savings.

Standard or custom built direct expansion cooling coils (evaporators) are manufactured for a wide variety of applications. From low temperature refrigeration through to comfort cooling applications.

Various circuiting options exist ensuring uniform refrigerant distribution across the entire coil. Single, dual or quad compressor circuits are available for both duct mounted and central system applications. Options of row and face control, as well as interlaced circuiting provide the highest precision in capacity regulation.

Tenemos una enorme experiencia en la construcción de bobinas de condensador curvadas según las especificaciones de cada cliente (3 filas máximo). Esto permite que la bobina pueda ser envuelta firmemente alrededor de otros componentes del sistema para conseguir una mayor eficiencia en el bloque y un impacto mínimo en el equipo.