Notre gamme complète d’échangeurs thermiques permet d’utiliser de l’eau, des solutions glycolées, de l’eau de nappe, de la vapeur et tous les réfrigérants.

Nos échangeurs thermiques peuvent être fabriqués selon nos propres spécifications ou bien celles de nos clients. Des conceptions d’échangeurs de chaleur identiques aux marques locales pour permettre un changement direct. La gamme complète de tailles de tubes de diamètre extérieur de 5mm, 7mm, 5/16″ (7,9mm), 3/8″ (9,5mm), 1/2″ (12,7mm) et 5/8″ (15,9mm) est disponible. Avec l’option à alésage simple ou à rainure internes. Une gamme variée d’écartement et de motifs d’ailettes existe : brut, à fente, à lance, ondulé, à lames, à persiennes.

Booster coils built with either flanged or slip-and-drive casings are available. These coils are commonly duct-mounted or used within VAV units for low-capacity reheat applications. Booster coils are constructed without headers, in either one or two circuit configurations.

Steam coils are ruggedly constructed for steam pressures up to 1034 kPa. Standard configurations, as well as special arrangements are available. Steam coils typically feature steam supply header and condensate return headers and connections on opposite sides of the coil. Steam supply connections are typically placed centrally on the supply header, with the condensate return connections typically placed at the bottom of the return header providing self-draining.

Fluid coolers for oil, after cooling, and special purpose cooling can be designed to your exact project requirements. Blast coolers, are a fast and efficient way of rejecting heat from process fluids before further cooling. Heat recovery (run-around) coils are an effective way to reclaim waste or process heat that would otherwise be lost, providing valuable operating cost savings.

Standard or custom built direct expansion cooling coils (evaporators) are manufactured for a wide variety of applications. From low temperature refrigeration through to comfort cooling applications.

Various circuiting options exist ensuring uniform refrigerant distribution across the entire coil. Single, dual or quad compressor circuits are available for both duct mounted and central system applications. Options of row and face control, as well as interlaced circuiting provide the highest precision in capacity regulation.

Nous avons une grande expérience dans la fabrication de condenseurs coudés selon les spécifications du client (maximum 3 rangées). Ceci permet à l’échangeur d’être emballé au plus près des composants du système pour une plus grande efficacité de l’emballage et réduire l’encombrement.